5 Things That Will Immediately Improve Your Accuracy (For Any Airgun)
Updated: Oct 3
Some links in this post are affiliate links. If you click through and make a purchase, RangeForgeUK may earn a small commission at no extra cost to you. We only link products we'd genuinely recommend.
Here is the uncomfortable truth that most new airgun owners discover the hard way: accuracy is mostly about you, not the gun.
A well-maintained sub-100 pound springer in the hands of a shooter with solid fundamentals will consistently outshoot a 500 pound PCP being held wrong. The mechanics of airgun shooting are not complicated, but they are specific — and the habits that feel natural at first are often the habits that spread groups.
These five adjustments cost nothing to implement. Most shooters who apply them see measurable improvement within a single session.
They apply to springers, PCPs and CO2 guns. Where a tip is specific to one type, it is labelled. They also apply to airsoft for range practice — if you are training with an airsoft rifle before moving to an airgun, every one of these transfers directly.
1. Consistent Hold (The Artillery Hold for Springers)
Of all the fundamentals, hold is the one that confuses beginners most — particularly with springers.
Most sports involving a gun, from firearms to airsoft, reward a firm, consistent hold. Grip it the same way every time and the variables reduce. Springers are the exception. A springer air rifle has a two-stage recoil cycle: the piston drives forward first, then bounces back. If you grip the gun firmly and fight against this movement, you introduce a variable based on exactly how hard you are holding at the moment the pellet leaves the barrel. Your groups will be inconsistent in a pattern that makes no sense — some shots high, some left, seemingly random.
The solution is called the artillery hold, and it is named after the way heavy artillery pieces are mounted to allow controlled recoil.
How to do it:
Rest the forestock of the rifle on the flat of your open, relaxed palm — not gripped in your fingers.
Your palm acts as a cradle. The rifle can move slightly under recoil.
Your trigger hand holds the pistol grip firmly enough to operate the trigger cleanly, but your support hand stays loose.
Rest your cheek on the stock consistently but do not press the stock hard into your shoulder. A light contact is enough to keep the rifle stable for the shot.
When you first try this, it will feel wrong. The gun will feel unstable. Shoot a group anyway. Then compare it with a group you shot with a firm hold. The artillery hold group will almost certainly be tighter.
Once the pellet has left the muzzle, none of your grip variables matter anymore — which is why relaxing the hold removes their influence from the shot.
For PCP and CO2 guns: these platforms do not have the same recoil cycle. A consistent, firm hold — the same grip every shot — is correct. You do not need the artillery hold.
2. Breathing Discipline
Your body moves when you breathe. Your ribcage expands, your shoulders shift, your whole upper body rises and falls in a slow cycle. If you squeeze the trigger while you are still moving, the gun moves with you — and the pellet goes where the gun was pointing a fraction of a second before you intended.
The fix is straightforward: do not shoot while your body is moving. The standard technique is the respiratory pause:
Take a normal breath.
Exhale slowly about halfway.
Stop breathing.
Take your shot within 3 to 6 seconds of stopping.
Resume breathing normally.
The respiratory pause puts you in the still point of the breathing cycle — after the exhale, before the next inhale, when your body is naturally quiet. This is not a breath-hold; you are simply catching the moment when the body stops moving.
After about 6 seconds of breath-hold, your body begins to compensate — small muscular adjustments, increased heart rate, loss of fine motor control. If you have not taken the shot in 6 seconds, let the breath out, relax for a moment, and begin the sequence again. Waiting longer does not help.
3. Trigger Release
The trigger is the last variable between the shooter and the shot. Handle it badly and you undo everything else.
The two most common beginner trigger errors are slapping and anticipating.
Slapping is exactly what it sounds like: a quick, jerky pull that drags the muzzle off target at the moment of discharge. It usually comes from trying to catch the moment the crosshairs look right. The muzzle shifts, the pellet follows.
Anticipating is a more subtle problem: the shooter's body tenses and flinches in advance of the recoil — a learned response to the noise and movement of the shot. The result is a consistent low-left bias (for right-handed shooters) that looks like a sighting problem but is actually anticipation.
The correct technique is a slow, deliberate, straight rearward pull. Not a press — a pull that increases pressure steadily, taking 1 to 3 seconds, until the shot breaks. The shooter should not be certain of exactly when the shot will go — the shot should come as a mild surprise. This is called the surprise break, and it is what removes anticipation from the equation.
Use the pad of your index finger (the fleshy tip, not the joint) to apply pressure. Keep your finger moving only rearward, never sideways. After the shot, hold the trigger rearward briefly before releasing.
4. Consistent Cheek Weld
Your eye position relative to the scope — or iron sights — must be identical on every shot. This is called cheek weld: the contact between your cheek and the comb (top) of the stock, which determines how high your eye sits behind the sight.
If your head position shifts even a few millimetres between shots, your point of aim shifts with it. Through a scope, this is called parallax error: the reticle appears to be on target, but your eye is not in the correct position to read it accurately, so the pellet lands somewhere else.
How to build consistent cheek weld:
Find the position where the scope or sight picture is clear and fully illuminated — no shadows around the edges of the scope's field of view.
Note where your cheek rests on the stock in that position.
Reproduce that contact point on every shot, before you even look through the scope.
Train yourself to settle the cheek first, then look — not the other way around.
A simple test: close your eyes, mount the rifle into your shooting position, open your eyes. If the sight picture is clear and centred, your cheek weld is consistent. If you see a shadow, your head is in the wrong place.
5. Follow-Through
Follow-through is the discipline most beginners ignore because it seems to happen after the shot — and the shot has already left the barrel. What can follow-through possibly change?
More than you expect. The pellet is in the barrel for a brief but measurable period after the trigger breaks. During this time, the recoil cycle is beginning. Any movement you introduce — dropping the stock, shifting your head to watch the target, relaxing your hold prematurely — can occur while the pellet is still in the barrel, and it will move the muzzle.
Good follow-through means:
Maintaining your sight picture and hold for 1 to 2 seconds after the shot breaks.
Keeping the trigger held rearward.
Staying in your shooting position and watching through the scope until you consciously decide the shot is complete.
Not looking up to watch the target hit immediately after the trigger breaks.
The habit to break is the instinct to "check" the shot — to lift the head and look up the range the moment the gun fires. It is natural. It is also the thing that is pulling your last shot low at every session.
A useful drill: call your shot. Before you lower the rifle or look at the target, say (or think) where the crosshairs were at the exact moment the shot broke. Then check the hole. If your shot call and the actual hole consistently agree, your trigger release and follow-through are working.
A Note on Zeroing and Pellet Traps
None of these improvements will show up clearly if your gun is not zeroed correctly for the distance you are shooting at, or if your target is not mounted securely enough to hold still.
The NiteHawk pellet trap is a solid choice for garden and indoor use — it comes with targets included, so you have everything you need to start zeroing straight away.
In Summary
Fundamental | What it fixes |
Artillery hold (springers) | Inconsistent groups caused by fighting the recoil cycle |
Breathing discipline | Muzzle movement during the shot from body movement |
Trigger release | Slapping and anticipation |
Consistent cheek weld | Parallax error and shifting point of aim |
Follow-through | Movement during the pellet's time in the barrel |
Work through these one at a time in a single session. Pick the one that describes a problem you recognise most closely, fix it, and observe the difference before moving on to the next. Trying to apply all five at once tends to produce tense, overthought shooting — the opposite of what accuracy needs.
Once they become habit, you will stop thinking about them. That is the point. The mechanics drop into the background, and shooting becomes instinctive, consistent, and more enjoyable.
All five fundamentals apply to air rifles, air pistols, CO2 guns, and airsoft rifles used for range practice. Legal UK shooting requires private land with the owner's permission. Not sure about the rules? Read our UK Airgun Law guide.



Comments